Part Number Hot Search : 
25F0F SMS6GE5 KSE210 C3025 DTB123 SNC538 NTSA4100 ASI3003
Product Description
Full Text Search
 

To Download D-607-09 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Fax-on-Demand: (800) 260-9099 (650) 361-6523 Before ordering check with factory for most current data.
FAX ID 5600
Description Data sheet
Coaxial Cable Termination
SolderSleeve PCB/coaxial cable terminators
www..com
Applications Used for terminating coaxial cable to printed circuit boards. Features/Benefits * Provides a completely shielded, low-resistance, matchedimpedance termination with very low VSWR (D-607 series only). * Transparent Kynar insulation sleeve provides encapsulation, inspectability, strain relief, and insulation. * Prefluxed solder preform provides a controlled soldering process. * One-piece design offers easy installation and lower installed cost. * Preinstalled PCB termination body provides convenience and ease of installation.
Product Options
Product series D-607 B-046
Typical application performance Matched impedance up to 2.3 GHz Effective transmission up to 100 MHz
Shield method Metal body Pin to ground
Product Selection Process
1. Select product series from the Product Options table above. 2. Determine cable RG number or outside diameter dimensions.
3. Select the appropriate part number from Table A (D-607 series) or Table B (B-046 series). * For D-607 (matched impedance) series, determine straight or right-angle entry to PCB and grid pattern, then select the appropriate part number from Table A below.
* For B-046 (PinPak, or pin to ground)
series, determine hole spacing and diameter. Refer to Table B for product selection (see illustration beneath Table B for cable dimensions).
Table A. D-607 Series Part Numbers
Cable dimensions (mm/in) Max. outside diameter RG cable number 174, 178, 179, 316, 404 Jacket 1.5-3.55 (.060-.140) Shield 1.1-3.15 (.045-.125) Dielectric 0.60-2.25 (.025-.090)
Part number Entry to PCB Straight grid 5.08 (.200) D-607-09
Right angle grid 5.08 (.200) D-607-10
Straight grid 2.54 (.100) D-607-40*
*Limited for use with RG 174, 178, and 404.
Users should independently evaluate the suitability of the product for their application.
R Electrical Interconnect Products 9-45
Table B. B-046 Series Part Numbers
www..com
Cable dimensions (mm/in) RG cable number 178, 404 179, 316 A 0.3-0.8 (.011-.032) 0.3-1.6 (.011-.063) B 0.5-1.7 (.019-.067) 1.2-2.5 (.047-.100) C 1.3-2.3 (.050-.091) .1.5-2.8 (.060-.110) D max. 3.4 (.134) 4.4 (.173) Pin diameter 0.6 (.023) 0.8 (.031) 0.6 (.023) 0.8 (.031)
Part number Spacing between pins 5.08 (.200) 2.54 (.100) B-046-14-N B-046-10-N B-046-11-N B-046-15-N B-046-66-N B-046-68-N
6.35 (.250) B-046-12-N B-046-13-N B-046-16-N B-046-18-N
A
B
C
D
Product Characteristics
Material Insulation Solder and flux Termination body/pin Typical performance Voltage drop Tensile strength Dielectric strength Temperature rating Insulation resistance
Radiation-crosslinked, heat-shrinkable polyvinylidene fluoride (Kynar) Sn63 Pb37, RMA flux Copper alloy, solder-plated
2.0 mV Exceeds strength of conductor 2.0 kV -55C to 150C 1000 megohms
Electrical performance (typical) D-607 series only Frequency VSWR (D-607-09, -40) 350 MHz 1.04 max. 700 MHz 1.05 max. 2.3 GHz 1.09 max.
VSWR (D-607-10) 1.04 max. 1.09 max. 1.12 max.
Specifications/Approvals
Series D-607 B-046
Raychem RT-1404 RT-1404
Installation
For proper installation of these devices, the correct heating tool and reflector attachment must be used.
Any one of the following Raychem heating tools is recommended: * HL1802E * AA-400 Super Heater * IR-1759 MiniRay * CV-1981 Refer to Raychem installation procedure ES61139 for detailed instructions and recommended reflector attachments.
You will find ordering information for these tools in the Application Equipment section of this catalog.
MiniRay, Raychem, and SolderSleeve are trademarks of Raychem Corporation. Kynar is a trademark of Elf Atochem North America, Inc.
9-46 Electrical Interconnect Products R
Users should independently evaluate the suitability of the product for their application.


▲Up To Search▲   

 
Price & Availability of D-607-09

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X